How to Install a Rincon 2P Half Insert

By Backcountry Hunting Gear and Equipment | Published: 2026-10-27

Category: How-to Guides

Learn how to install the Rincon 2P Half Insert for bug and weather protection. Step-by-step guide to set up a comfortable enclosed sleeping area inside your tent.

Quick answer

Installing the Rincon 2P Half Insert takes just a few minutes. Clip it inside your Rincon 2P Tent to create a fully enclosed, double-wall sleeping area for one person, blocking bugs and weather while you sleep.

Why use a half insert instead of a full inner tent?

A half insert saves weight and space while still giving you a bug-proof, weather-resistant sleeping zone. The other half of the tent remains open for gear storage or cooking under the fly. This setup is ideal for solo hunters who need a compact shelter without carrying a full double-wall tent.

What you need before starting

You'll need the Rincon 2P Tent (main body and fly) and the Rincon 2P Half Insert. Make sure the tent is pitched on level ground with all guylines and stakes secure. The insert attaches inside the tent, so the tent must be fully set up first.

Installation steps

Pitch the Rincon 2P Tent: Set up the tent body first, then drape the rainfly over the top. Stake out all corners and guylines so the tent is taut and stable. The insert needs a properly tensioned tent to clip in smoothly. If the tent is loose, the insert may sag and reduce headroom.
Locate the attachment points: Inside the tent, find the clip loops and toggles along the center seam and side walls on the half you want to enclose. The insert uses these points to hang securely. Check the insert's orientation—the mesh side should face the open half of the tent. Mistake: Attaching the insert backward can block ventilation and make entry awkward.
Clip the insert to the tent ceiling: Starting at the highest point, clip the insert's top corners to the corresponding loops on the tent's ceiling. Work your way down each side, clipping the insert's edges to the tent's side wall loops. Ensure the insert is evenly tensioned to avoid wrinkles. Checkpoint: If the insert is too tight, it may pull the tent out of shape; if too loose, it may flap in wind.
Secure the floor and door: The insert has a built-in floor that lies flat on the tent floor. Smooth out any wrinkles. Zip the insert's door closed to create a sealed sleeping area. For extra weather protection, ensure the insert's zipper is fully closed and the fly overlaps the opening. Common mistake: Leaving the insert door unzipped can let bugs and drafts enter your sleeping area.
Test the seal and adjust: After installing, check all seams and zippers for gaps. Shine a flashlight from outside to spot any light leaks. Adjust the insert's clips or reposition the floor to eliminate gaps. A tight seal keeps bugs out and retains warmth. If you see light, you have a potential bug entry point—adjust until it's sealed.

Product details

Rincon 2P Half Insert: The Rincon 2P Half Insert fits inside the Argali Rincon 2P Tent to provide full double wall coverage for half of the tent, providing a comfortable enclosed sleeping area for one person (half of the tent). This design gives you a protected sleeping area while leaving the other half open for gear or cooking, maximizing space and versatility.
Rincon 2P Half Insert