How to Seal Rincon 2P Tent Seams for Dry Camping

By Backcountry Hunting Gear and Equipment | Published: 2026-10-21

Category: How-to Guides

Keep your Argali Rincon 2P tent fully waterproof with this step-by-step seam sealing guide. Learn the essential process and common pitfalls.

Quick Answer

Seal the Rincon 2P tent seams using Argali's specifically formulated seam sealer for a reliable waterproof barrier in backcountry weather.

Why Proper Seam Sealing Matters

Factory tent seams can leak over time, especially after repeated use. Sealing the Rincon 2P’s seams creates a permanent barrier against rain and condensation, crucial for staying dry on multi-day hunts.

Before You Start: Tips for Best Results

Apply the sealer in a well-ventilated area when temperatures are above 50°F (10°C). Ensure the tent is clean and completely dry. Lay the tent flat with the seam side up. Avoid application on windy days to prevent dust from sticking.

How to Seal Rincon 2P Tent Seams: Step by Step

Prepare the Seams: Inflate or pitch the tent to tension the seams and make them easier to reach. Wipe each seam with a dry cloth to remove dust or debris. Do not use water or solvents, as moisture will prevent the sealer from adhering.
Apply the Sealer: Hold the tube nozzle flat against the seam. Squeeze a thin, even bead along the entire length, focusing on stitch lines and corners. Apply sealer only to seam stitching, not to broad fabric areas—it will crack if overapplied.
Spread and Smooth: Use a fingertip (wear a disposable glove) or a small brush to gently spread the sealer into the stitches. Work quickly before it thickens. Smooth out large drips; they can attract dirt and create hard lumps.
Dry and Cure: Leave the tent flat and undisturbed for at least 12 hours (24 hours in high humidity). Do not rush to repack. Curing time matters—packing early can peel off the still-tacky sealer and ruin the waterproofing.
Test Your Work: After curing, set up the tent and lightly spray the seams with a garden hose or run water over them from the outside. Check for any wet spots inside. If you see dripping water inside, reapply sealer to that specific area and let it cure again.

Product Used for This Guide

Rincon 2P Tent Seam Sealing: Specifically formulated for the Rincon 2P tent to seal all seams. Provides reliable, long-lasting waterproof protection in harsh weather. Using the correct formula ensures the sealer bonds properly with the tent’s fabric and doesn’t degrade or peel off during cold, wet hunts.
Rincon 2P Tent Seam Sealing